ipPulse is a Remote Status Monitoring Tool. Use ipPulse to monitor the up / downward status of IP connected devices (nodes) on any IP connected network. ipPulse uses a motley of methods, including ping, tcp connects, and SNMP to pate and verification the network connectivity of a number of user-defined nodes. ipPulse alerts you to failures using a motley of techniques ranging from audible messages to email and pager notification. Supports a macroscopical number of objective hosts entered as either hostnames or IP addresses. The number keister be imported from a text file. Polls the number on a cyclical base with full see over the number wheel timing parameters. Supports a primary and secondary test. Supports touchstone Ping ICMP Echo Requests / Replies and automatically uses UDP High Port Ping under Winsock 2 for failed contacts. Primary test merely. TCP Port numbers for TCP link tests are assignable on a per-node base. Primary or secondary test. Optionally uses SNMP v1 as a secondary test by requesting MIB2 OID interfaces.ifTable.ifEntry.ifOperStatus for every interface found on the objective node. Community names are assignable on a per-node base. Optional SNMP queries keister be made for obtaining more copious data from the objective host. ipPulse includes a act of OID presets and 12 user defined OIDs. Example: you keister incur MAC addresses for every interface from an SNMP enabled host. Multiple alerts and logging. Alert options include beeping your computer, playing a undulation file, notifying someone by email, or paging someone using either touchstone numeric or TAP compatible alphanumeric pagers. Logging options include logging whole test results to a text file, logging merely errors to a text file, or logging errors to a dynamically created HTML page. Any combination of logging options keister be used. Alerts are issued upon failures using user-defined criteria. Changes from a FAIL nation to a PASS nation keister immediately generate email messages or pager messages.