Use Serial timer to easily communicate with external appliances on an RS232 joining. Serial timer has powerful features similar to the timer software that Work with completely types of series ports, including USB adaptors, Wireless Device Servers or any virtual port. This program is especially made to communicate with the k108, 108 and k108 multi drop relay boards via series joining. The program consists of 11 forms. A main shape, 8 output forms, 1 input shape and an settings shape. The main shape gives the status of completely 8 outputs and 4 inputs. The location of each output and input lavatory be altered on this shape. Each output shape lavatory be selected by the push-buttons marked 1 to 8 or the inputs lavatory be selected by the push-button Inputs. The main shape lavatory be minimized so that the user lavatory do other tasks, and the timing program will still draw in the background. All output forms lavatory be in ON, OFF or AUTO modes. When in AUTO the output will be on or away depending on the times selected. Only output 7 will work over the midnight catamenia e.g. 11pm Friday to 2am Saturday, by selecting start and finish days. Output 8 lavatory take up to 10 switching times within the 24hr catamenia from 00: 00: 00 to 23: 59: 59. All outputs take an additional pulse timer from 1 sec to 24 hours (curing in minutes), on or away. The pulse will work regardless of the mood the shape is in, ON, OFF or AUTO. The Inputs shape lavatory take up to 4 inputs. Inputs 1 & 2 lavatory turn on or away outputs, if outputs are in AUTO mood. Input 3 lavatory turn on or away outputs for a curing time, if the outputs are in AUTO mood. Inputs 4 lavatory play a selected sound (.wafture file) in windowsmedia and c: timer.