AutoFEM Static Analysis provides the calculation for the stress state of structures under forces which are constant in terms of time. To date probably this is the most demanded task in the design. By using the module "Static analysis, " the engineer can evaluate the allowable stresses in design which is developed, fix drawbacks of the design and create necessary changes (optimize) the product. Static analysis also allows one to: - read into calculate the geometric non-linearity; - fix the stress-strain state of temperature effect; - perform calculations of adjoin problems; Force, coerce, rotation, acceleration, posture onus, hydrostatic coerce, torque, and temperature can be applied to the structure as external loads. To limit the structure, consummate restriction of motility can be used, as comfortably as partial restriction concerning the axes (in Cartesian, cylindrical and spherical coordinate systems). If it is assumptive that under the onus a persona may digest significant displacement, one should direct atmospherics analysis which takes into calculate large displacements. The non-linear problem-solver organizes the appendage of incremental loading and provides the solution of the linear organization of equations at each loading mistreat. In increase there is a possibility to count stress induced by thermal subject (problem of thermal elasticity). The temperature can be applied directly to the persona or results of temperature calculation can be used. Main results of atmospherics analysis are as follows: - subject of displacements of the structure in nodes of finite-element network; - subject of straining; - subject components of the stress; - vigour of deformation; - reaction forces; - subject distribution of prophylactic factor; This information is usually sufficient to portend the behaviour of structures and create a decision how to optimize the geometric shape of the product.